#Cisco asa 5510 replacement upgrade
Use this image to upgrade to a later version of ASDM using your current ASDM or the ASA CLI.
#Cisco asa 5510 replacement software
ASDM Software (Upgrade) Choose your model > Adaptive Security Appliance (ASA) Device Manager > version. The ASA package has a filename like cisco-asa.9.6.2.SPA.csp. Verify that new ASDM version is working by launching the ASDM and checking the version number is reported 6.4(5), by clicking Help –> About Cisco ASDM 6.4. The ASA package includes both ASA and ASDM. Set the ASA to use the new ASDM image:ĪSA5510# conf t ASA5510(config)# asdm image disk0:/asdm-645.bin ASA5510# write mem Copy the new ASDM software image from a TFTP server to the ASA, using the following commands:ĪSA5510# copy tftp disk0 Address or name of remote host ? 192.168.10.10 Source filename ? asdm-645.bin Destination filename ? asdm-645.binĪSA5510# show flash | include asdm-645.bin Upgrade the ASDM software from version 6.2(5) to 6.4(5): Verify that the software version and system image file are listed correctly. The model 5516-X compulsary to buy with firepower module What is the estimate lifetime for this model. The existing ASA 5510 is running 8.2 (2) and ASDM 6.2 (5). Solved: Hi, We plan to replace ASA 5510 to new model. According to Cisco EOL announcement the replacement product would be ASA5515-SSD120-K9. After the reboot, check that the ASA has booted from the new image by issuing the command show version. One of my customers has an aging ASA 5510 (ASA5510-BUN-K9) and I'm planing to purchase replacement, migrate and keep the existing appliance as cold backup.
Set the ASA to boot from the new image not the old one:ĪSA5510# conf t ASA5510(config)# no boot system disk0:/asa822-k8.bin ASA5510(config)# boot system disk0:/asa825-k8.bin ASA5510# write mem ASA5510# reload Verify the new image has been copied to the local disk:ĪSA5510# show flash | include asa825-k8.bin I’m offering you here a basic configuration tutorial for the Cisco ASA 5510 security appliance but the configuration applies also to the other ASA models as well (see also this Cisco ASA 5505 Basic Configuration). Copy the new IOS software image from a TFTP server to the ASA, using the following commands:ĪSA5510# copy tftp disk0 Address or name of remote host ? 192.168.10.10 Source filename ? asa825-k8.bin Destination filename ? asa825-k8.bin Accessing t int=Inside_Interface.!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!. 1GB Memory Upgrade for Cisco ASA 5510 REMANUFACTURED. This Cisco ASA Tutorial gets back to the basics regarding Cisco ASA firewalls. The process for both pieces of the upgrade is very straight forward, so here goes: Upgrading the ASA image from 8.2(2) to 8.2(5) This process also required upgrading the ASDM software to version 6.4(5) so that the newly upgraded appliance could still be managed via the GUI.
I recently to needed to upgrade the Software Image on a Cisco ASA 5510 security appliance from version 8.2(2) to 8.2(5).
0 kommentar(er)
